Hi
Experts
Am having a Web i report on Excel as a source The following is the report format.
| Mat type | Unit | Amount 1 | Amount2 |
|---|---|---|---|
| Marble | Sft | 56 | 56200 |
Iron | Per tonn | 38500 | 256400 |
Bricks | Per piece | 6 | 5600 |
| Sand | Brass | 1800 | 56890 |
| Cement | Bags | 250 | 32500 |
| Crushed Sand | Brass | 1900 | 59630 |
| White Cement | Bags | 260 | 35000 |
The above is my current report format.
Now my requirement is to set up the assembly's in the same report.i want to make assembly based on MAT TYPE dimension. Sand,Cement,Crushed sand,White Cement are common for every table.
The following is my report requirement
| Mat Type | Unit | Amount 1 | Amount 2 |
|---|---|---|---|
| Marble | Sft | 56 | 56200 |
| Cement | Bags | 250 | 32500 |
| Crushed Sand | Brass | 1900 | 59630 |
| White Cement | Bags | 260 | 35000 |
| Mat Type | Unit | Amount 1 | Amount 2 |
|---|---|---|---|
| Iron | Per tonn | 38500 | 256400 |
| Cement | Bags | 250 | 32500 |
| Crushed Sand | Brass | 1900 | 59630 |
| White Cement | Bags | 260 | 35000 |
| Mat Type | Unit | Amount 1 | Amount 2 |
|---|---|---|---|
| Bricks | Per piece | 6 | 5600 |
| Cement | Bags | 250 | 32500 |
| Crushed Sand | Brass | 1900 | 59630 |
| White Cement | Bags | 260 | 35000 |
| Mat Type | Unit | Amount 1 | Amount 2 |
|---|---|---|---|
| Sand | Brass | 1800 | 56890 |
| Cement | Bags | 250 | 32500 |
| Crushed Sand | Brass | 1900 | 59630 |
| White Cement | Bags | 260 | 35000 |
i want like this assmebly's.
Can anybody plz reply.
help full answer must be appreciated.
Thanks & Regards
Suresh Gaddam.